Download WinTCD User Manual

Using the External Inputs and Outputs
Creating Continuous
SoundTrak Settings
Files
In order to record Continuous
SoundTrak data, special acquire
mode settings need to be created.
There are no sample factory
default settings since most likely
users will want to convert their
own customized settings to record
the Continuous SoundTrak data.
Use the following steps to create
Continuous SoundTrak settings:
Configuration
Configure Event List
Configure Fast Curves
Configure Trend
Intermittent Curve Recording
Configure S-Keys
Configure Footswitch
External Connections
User Definable Items
System
Figure 1: Click on the Monitoring Configuration menu and then on
the External Connections menu point .
Configure External Connections
Analog Inputs Analog Outputs
X
Digital Outputs
Continuous SoundTrak Recording:
ON
1. In the acquire mode, load the
settings file which you want to
use or create a new settings file
and set the system up the way
you want it.
2. Select the External Connections menu point out of the
Configuration menu(Figure 1).
3. Click on the Digital Outputs
tab to access the Continuous
SoundTrak configuration
facility (Figure 2).
4. Configure the Continuous
SoundTrak Recording combo
box to On by clicking the
mouse on the arrow and
selecting On (Figure 2).
OK
Cancel
Figure 2: External Connections dialog box (digital output tab).
Note: The external connections dialog box is only available in the
acquire mode and only before any data has been saved.
Note: Continuous SoundTrak is only available in the monitoring mode
and only if there is a valid software license installed on the system which
contains the option.
5. When finished, click on OK.
6. Save the active setting with the
Save or Save As functions in
the Settings menu.
Note: Continuous SoundTrak settings will be colored blue in the list of
settings in the settings manager. They will also have a blue dot next to
the name.
S17-17