Download WinTCD User Manual

Transcript
Preparing the System for Monitoring
CD
T
WinTCD - [Acquiring data for Jones, W]
Acq
Exam Settings View Doppler Configuration Indicators Report Window Help
win
CD
T
WinTCD - [Acquiring data for Jones, W]
Acq
Exam Settings View Doppler Configuration Indicators Report Window Help
win
V
VI SYS
L T H C
V
V
H E
2. Click the Right mouse button.
CH 1 (S1) - 2 Mhz PW : MCA R
33
-1
Mean
50
15
-
SV
SYS
-
-
0
-50
Event List
* Event Descriptor
Time
-100
9
PI
DIA
Trend Window
Ch1: SYS
100
50
50
Ch1: SYS
100
<<
>>
Ch1: DIA
Ch1: DIA
13:00:00
Vessel Labels
Nic Vue
14:00:00
SoundTrak On/Off
Envelope
Spectra On/Off
Units
WinTCD - [Acquiring
9:09 A.M.
These 5 keys correspond to the 5
softkeys on the screen display.
S1
S2
S3
SAVE
FREEZE
PRINT
PROBE
_
DIRECTION
+
_
WINDOW
MENU
ESCAPE
ENTER
+
_
+
SWEEP
_
+
GAIN
+
_
DEPTH
S5
ZERO
+
_
S4
MUTE
DELETE
_
AMPLITUDE
4. Repeat until all five S-keys
have been assigned a specific
function.
50
Depth
100
SAMPLE
3. Click on the function you want
to assign to the selected softkey
(Figure 3).
X
REC
100%
cm/s
Start
1. Position the mouse pointer
over the softkey displayed
towards the bottom of the
Acquisition window (Figure 2).
_
TM
R E
+
SCALE
Figure 1: The softkeys displayed
on the screen can be clicked on
to execute the action or the
corresponding S-key on the
remote control can be pressed to
execute the action.
H E
V
Example
If, for example, the S1 key is
currently assigned to the Vessel
Labels function and you want to
change it to Units, use the Right
mouse key and click on the Vessel
Labels softkey and then click on
Units from the options menu. The
first softkey (S1) will now read
Units and pressing the S1 key on
the Remote Control will alternate
the Flow Velocity Scale between
cm/s and kHz.
Note: You can not assign the
same function to multiple S-keys
with the mouse. If you want to
reassign a function, you must first
remove the function from the
current key.
V
You can select, from a menu of
options, the functions of the five
keys (S1 - S5) on the Remote
Control (Figure 1). These five
keys allow you to quickly execute
the chosen function by simply
pressing the corresponding key
(S1 - S5) on the Remote Control
or by clicking on the displayed
softkey.
VI SYS
L T H C
V
Set the Remote Control
S1 - S5 key functions
Note: Alternatively the S-keys can
be configured by selecting the
function Configure S-keys out of
the Configuration menu. In the
pop up dialog box a set of S-keys
can be defined for each of the
three operation windows (main
window, freeze window, and
review window). See next page.
_
X
TM
R E
REC
100%
CH 1 (S1) - 2 Mhz PW : MCA R
33
cm/s
50
-1
Depth
Mean
100
50
15
-
SV
SYS
-
-
0
-50
Event List
* Event Descriptor
Time
-100
9
PI
DIA
Trend Window
Ch1: SYS
100
50
50
Ch1: SYS
100
<<
>>
Ch1: DIA
Ch1: DIA
13:00:00
Vessel Labels
Start
Nic Vue
14:00:00
SoundTrak On/Off
Envelope
Spectra On/Off
WinTCD - [Acquiring
Units
9:09 A.M.
Figure 2: Position the mouse
pointer over the displayed softkey
you want to define and then click
the Right mouse button.
Indicators On/Off
Envelope
Filter Down
Filter Up
Toggle PW/CW
SoundTrak On/Off
Spectra On/Off
Units
Vessel Labels
Graphics Report
Parameter Boxes
Indicators Settings
Indicators Reset Count
Curve Recording On/Off
Settings Manager
Boost Mode
Squelch On/Off
Flow Separation On/Off
Export SoundTrak
Multi Depths Link On/Off
MD Expand Depths
MD Contract Depths
Inc. Rx Pulse Width
Dec. Rx Pulse Width
M-Mode Display Options
Display Range
Inc. Tx Pulse Width
Dec. Tx Pulse Width
Tx/Rx Linkage On/Off
Calculate VMR (H-Cursors)
Calculate VMR (A-Cursors)
Audio Playback Scale Set
Set Delta Mean
S-Markers
I-Markers
Noise Reduction
Fast Curve Window
Figure 3: Click on the function
you want to assign to the selected
key. (List shown is an example
from the monitoring mode)
S5-5