1
Download CH? (Query Only)
Transcript
Commands Listed in Alphabetical Order
Conditions
This command requires a DPO3PWR application module.
Group
Power
Syntax
POWer:HARMonics:STANDard {NONe|IEC|MIL}
POWer:HARMonics:STANDard?
Arguments
NONe sets no standard for harmonic tests.
IEC sets IEC 610003-2 standard for harmonic tests.
MIL sets MIL1399 standard for harmonic tests.
Examples
POWER:HARMONICS:STANDARD IEC sets IEC standard for harmonic tests.
POWER:HARMONICS:STANDARD? might return :POWer:HARMonics:STANDard
NONe indicating that no standard is set.
POWer:INDICators
Sets or returns the state of the measurement indicators for the power application.
Conditions
This command requires a DPO3PWR application module.
Group
Power
Syntax
POWer:INDICators {OFF|ON|0|1}
POWer:INDICators?
Arguments
OFF or 0 turns off the measurement indicators.
ON or 1 turns on the measurement indicators.
Examples
POWER:INDICATORS 1 turns on the indicator.
POWER:INDICATORS? might return :POWER:INDICators 0 indicating that
the indicator is off.
MSO3000 and DPO3000 Series Programmer Manual
2-315
