1
Download CH? (Query Only)
Transcript
Commands Listed in Alphabetical Order
Examples
ALIAS:DELETE:ALL deletes all existing aliases.
ALIas:DELEte[:NAMe] (No Query Form)
Removes a specified alias. This command is identical to ALIas:DELEte
Group
Alias
Syntax
ALIas:DELEte[:NAMe] <QString>
Arguments
<QString> is the name of the alias to remove. Using ALIas:DELEte[:NAMe]
without specifying an alias causes an execution error. <QString> must be an
existing alias.
Examples
ALIAS:DELETE[:NAME] “STARTUP” deletes the alias named STARTUP.
ALIas[:STATE]
Turns aliases on or off. This command is identical to the ALIas command.
Group
Alias
Syntax
ALIas[:STATE] {<NR1>|OFF|ON}
ALIas[:STATE]?
Arguments
OFF or <NR1> = 0 turns alias expansion off. If a defined alias is sent when
ALIas:STATE is OFF, a command error (102) is generated.
ON or <NR1>0 turns alias expansion on. When a defined alias is received, the
specified command sequence is substituted for the alias and executed.
Examples
ALIAS[:STATE] OFF turns the command alias feature off.
ALIAS[:STATE]? returns 0 when the alias feature is off.
ALLEv? (Query Only)
Prompts the oscilloscope to return all events and their messages (delimited by
commas), and removes the returned events from the Event Queue. Use the *ESR?
MSO3000 and DPO3000 Series Programmer Manual
2-101
