1
Download CH? (Query Only)
Transcript
Commands Listed in Alphabetical Order
Conditions
This command requires a DPO3PWR application module.
Group
Power
Syntax
POWer:REFLevel:ABSolute:HIGH <NR3>; Ranges={D,-1e6,+1E6}
POWer:REFLevel:ABSolute:HIGH?
Arguments
Examples
<NR3> is the absolute high value in volts. Default value is 0.0E+0
POWER:REFLEVEL:ABSOLUTE:HIGH 2 sets the absolute high value to 2.000.
POWER:REFLEVEL:ABSOLUTE:HIGH? might return
POWER:REFLEVEL:ABSOLUTE:HIGH 2 indicating that the absolute high
value is set to 2 V.
POWer:REFLevel:ABSolute:LOW
Sets or returns the low reference level for power measurements.
Conditions
This command requires a DPO3PWR application module.
Group
Power
Syntax
POWer:REFLevel:ABSolute:LOW <NR3>; Ranges={D,-1e6,+1E6}
POWer:REFLevel:ABSolute:LOW?
Arguments
Examples
<NR3> is the absolute low value in volts. Default value is 0.0E+0.
POWER:REFLEVEL:ABSOLUTE:LOW 1.0 sets the absolute high value to 1.0000.
POWER:REFLEVEL:ABSOLUTE:LOW? might return
POWER:REFLEVEL:ABSOLUTE:LOW 1.0000 indicating that the absolute low
value is set to 1 V.
POWer:REFLevel:ABSolute:MID<1-3>
Sets or returns the mid reference level for measurements. MID3 is specific to
the power application.
MSO3000 and DPO3000 Series Programmer Manual
2-327
