1
Download CH? (Query Only)
Transcript
Commands Listed in Alphabetical Order
Examples
POWER:HARMONICS:IEC:FUNDAMENTAL 1 sets the fundamental current to
1.0000 A.
POWER:HARMONICS:IEC:FUNDAMENTAL? might return :POWER:HARMONICS:
IEC:FUNDAMENTAL 16 indicating that the fundamental current for IEC
harmonics is set to 16.0000 A.
POWer:HARMonics:IEC:GROUPing
Sets or returns the enabled state for grouping of IEC harmonics.
Conditions
This command requires a DPO3PWR application module.
Group
Power
Syntax
POWer:HARMonics:IEC:GROUPing {OFF|ON|1|0}
POWer:HARMonics:IEC:GROUPing?
Arguments
ON or 1 enables grouping of IEC harmonics.
OFF or 0 disables grouping of IEC harmonics.
Examples
POWER:HARMONICS:IEC:GROUPING OFF disables grouping of IEC harmonics.
POWER:HARMONICS:IEC:GROUPING? might return :POWER:HARMONICS:IEC:
GROUPING 1 indicating that the grouping is enabled for IEC harmonics.
POWer:HARMonics:IEC:INPUTPOWer
Sets or returns the class D rated input power for IEC harmonics.
Conditions
Group
Power
Syntax
POWer:HARMonics:IEC:INPUTPOWer <NR3>
POWer:HARMonics:IEC:INPUTPOWer?
Arguments
2-300
This command requires a DPO3PWR application module.
<NR3> is the class D input power. Valid values range from 0 to 600 in increments
of 10. The unit of measure is watts.
MSO3000 and DPO3000 Series Programmer Manual
