1
Download ELECTRICAL TROUBLESHOOTING MANUAL
Transcript
Error Messages Hardware Error Messages (Cont) 33104: X and Y resolver Error.......................Chapter 9 Failure in X and Y resolver signals on channel %.f. X, Y signals are less than noise value. 33105: Resolver Feed Error..........................Chapter 9 Failure in feed signal to resolvers. 33106: Drive Unit Offset Error......................Chapter 9 Drive Unit offset exceeded maximum on channel %.f. 33107: Incorrect DC-link type.......................Chapter 9 Physical DC-link type does not match configuration. 33108: Incorrect Drive Unit Type.................... Chapter 9 Physical Drive Unit Type for channel %.f does not match configuration. 33148: Axis Computer Error......................Chapter 2 & 9 Axis computer DSP was stopped with hw interrupt due to miscellaneous error. 33150: Axis Computer Int Error......................Chapter 2 Axis computer DSP was stopped with hw interrupt due to interrupt error. 33151: Axis DSP Output Overflow..................... Chapter 2 Axis computer DSP was stopped with hw interrupt due to output overflow error. 33152: Axis Computer Drive Unit..................... Chapter 2 Axis computer DSP was stopped with hw interrupt due to drive unit error. 33153: Axis DSP Tach Overflow.......................Chapter 2 Axis computer DSP was stopped with interrupt due to tachometer register overflow. 33154: Axis DSP XY Overflow.........................Chapter 2 Axis computer DSP was stopped with hw interrupt due to X, Y register overflow. 33155: Axis DSP RC Overflow.........................Chapter 2 Axis computer DSP was stopped with hw interrupt due to ring controller register overflow. Electrical Troubleshooting Guide IRB6400 M94A Appendix A - 25
