1
Download User Guide PLC WorkShop for Modicon
Transcript
PLC WorkShop for Modicon Chapter 11 – Instructions, Transfer and move instructions Figure 33 – IBKR instruction function block Top Node The 4x register is the first holding register in a source table. The registers in this table contain values that are pointers to the non-contiguous registers you want to collect in the operation. Middle Node The 4x register is the first in a block of contiguous destination registers. Bottom Node The value entered indicates the length (the number of registers in the source table). IBKW DESCRIPTION The Indirect block write (IBKW) instruction lets you copy the data from a table continuous registers into several non-contiguous registers dispersed throughout your application. - 490 -
