Download User Guide PLC WorkShop for Modicon
Transcript
PLC WorkShop for Modicon Chapter 11 – Instructions, Miscellaneous Instructions ITOF (Signed/Unsigned Integer-to-Floating Point Conversion) DESCRIPTION ITOF is a three-node instruction that converts signed or unsigned integer value in the top node to a floating point (FP) value and posts that FP value in two contiguous holding registers. The first register is specified in the middle node. Figure 86 – ITOF Instruction The top and middle nodes may contain either: l A constant value up to 65,535 l A 3x input register l A 4x holding register The middle node is the first of two contiguous 4x holding registers where the converted floating point value is stored. The bottom node contains a constant value of 1. FTOI (Floating Point-to-Signed/Unsigned Integer Conversion) DESCRIPTION FTOI is a three-node instruction that converts the floating point (FP) value in the top node to a signed or unsigned integer value and posts that integer value in the middle node. - 639 -
Related documents
505 PLC WorkShop User Guide
PLC WorkShop for Siemens S5 - Performance Series
PLC WorkShop - FasTrak SoftWorks, Inc.
Unity Pro 2.2 984 to Unity Converter User manual
User`s Guide - Schneider Electric
Modicon Ladder Logic Block Library User Guide Volume 1
2015CHEVY CITY Express Van
Bus Air Conditioning Unit - North America Transport Air Conditioning
Modicon Quantum CHS 110 Hot Standby System Planning and
1050 Series of HPLC Modules Service Handbook
AFOLUX LX Series Panel PC User Manual
Q35 User`s Manual