1
Download Enterasys Enterasys SecureStack B2 B2G124-24 Specifications
Transcript
Configuring Diffserv Policies and Assigning Classes
Example
This example shows how to rename the Diffserv “admin” class to “system”:
B2(rw)->set diffserv class rename admin system
Configuring Diffserv Policies and Assigning Classes
Purpose
To review, create, and configure Diffserv policies and assign classes.
Commands
For information about...
Refer to page...
show diffserv policy
11-9
set diffserv policy create
11-10
set diffserv policy delete
11-10
set diffserv policy class
11-11
set diffserv policy mark
11-11
set diffserv policy police style simple
11-12
set diffserv policy police action conform
11-13
set diffserv policy police action nonconform
11-13
set diffserv policy rename
11-14
show diffserv policy
Use this command to display information about Diffserv policies.
Syntax
show diffserv policy {summary | detailed policyname}
Parameters
summary Displays Diffserv policy summary information.
detailed policyname
Displays detailed Diffserv information for a specific policy.
Defaults
None.
Mode
Switch command. Read‐Only.
SecureStack B2 Configuration Guide
11-9
