Download Enterasys Enterasys SecureStack B2 B2G124-24 Specifications
Transcript
set cos port-resource irl
Defaults
None.
Mode
Switch command, read‐write.
Usage
The default port group 0.0 cannot be deleted.
Example
This example deletes all IRL Port Groups except for the Default group 0.0:
B2(su)->clear cos port-config irl all
set cos port-resource irl
Use this command to set the inbound rate limit parameters for a specific IRL resource for a specific port group.
Syntax
set cos port-resource irl group-type-index irl-index {[unit {kbps}] [rate rate]
[type {drop}]}[syslog enable | disable] [trap enable|disable]
Parameters
group‐type‐index
Specifies an inbound rate limiting port group/type index. Valid entries are in the form of group#.port‐type. Valid values for group# can range from 0 to 7. Valid values for port‐type can range from 0 to 1, although only port type 0 is currently supported. For example, port group 3 would be specified as 3.0. irl‐index
Index number of the inbound rate limiter resource associated with this entry. Valid values range from 0 to 99.
unit
Unit of measure for the inbound rate limiter (only option is Kbps).
kbps
Kilobits per second.
rate rate
Data rate for this inbound rate limiter. This is the actual rate limit. Valid values range from 512 to 1,000,000 Kbps for a Gigabit port.
type drop
Action for the rate limiter. The only action option is drop the frame if all limiters are exceeded.
syslog enable|disable
Enable or disable reporting a syslog entry if limiters are exceeded.
trap enable|disable Enable or disable sending a trap if limiters are exceeded.
Defaults
None.
Mode
Switch command, read‐write.
SecureStack B2 Configuration Guide
12-27
Related documents
Enterasys D-Series Specifications
Enterasys Networks 9034313
Enterasys C2K122-24 Specifications
Enterasys SecureStack A2 A2H124-48P Specifications
Enterasys Enterasys Matrix DFE-Gold Series Specifications
Enterasys Enterasys SecureStack B2 B2G124-24 Specifications
Enterasys 802.1Q Specifications
Enterasys 10GB-ER-SFPP network switch module
Enterasys N Standalone (NSA) Series Specifications
Enterasys N Standalone (NSA) Series Specifications
Enterasys C3G124-48P 48-Port Gigabit Ethernet Switch (C3G124-48P-G)
Release Notes Template