Download Security Command XR200 User`s guide

System Setup
System Setup Record
485B System Setup Record
We have provided this System Setup section to allow you to track
the current and future status of the programmable options on
your Security Command system. If you make changes to the
system, you should update the information contained on these
pages.
This section allows you to track the status of the XR200-485B
programmable options on your Security Command system.
Your system is monitored by a central station.
❏ Yes
❏ No
C/S Name: _________________________________________
Address: ___________________________________________
City/State: __________________________________________
Emergency Phone: ___________________________________
Service Phone: ______________________________________
Service Manager: ____________________________________
Your system sends Opening and Closing reports.
❏ Yes
❏ No
Your system sends Zone Bypass reports.
❏ Yes
❏ No
Your system is programmed for Two Man Rule and requires
a second user code to be entered when disarming an area, or
for door access.
❏ Yes
❏ No
Your system is programmed for Early Morning Ambush and
requires a second user code to be entered to prevent an
Ambush message from being sent to the central station.
❏ Yes
❏ No
Amount of time to enter second user code for the Early Morning
Ambush delay:
Early Morning Ambush delay ______________ minutes.
Your area # ____ is programmed for Bank Safe & Vault to
prevent anyone from disarming outside of the scheduled
open period.
❏ Yes
❏ No
Your system sends Ambush reports.
❏ Yes
36
❏ No
XR200-485 System Setup