Download POSJet 1000 Programming Guide

Control Codes
Summary by Code
POSjet™ 1000
Programmer's Guide
ASCII
Command
Hex
IPCL Equivalent
Code
Description
Page
[ESC] A <n>
1BH,41H
none
Set variable line spacing to
n/72 inch.
37
[ESC] B <n1> <n2>
<n3>...<ni> 0
1BH,42H
none
Set vertical tab stops.
38
[ESC] C <n>
1BH,43H
&%SL <m1> <m2>
Set form length in lines.
39
[ESC] C [NUL] <n>
1BH,43H
&%SI <m1> <m2>
Set form length in inches.
40
[ESC] D <n1> <n2> ...
<ni> <0>
1BH,44H
none
Set horizontal tab stops.
34
[ESC] E
1BH,45H
&%MM
Begin emphasized print.
61
[ESC] F
1BH,46H
&%CM
End emphasized print.
61
[ESC] G
1BH,47H
&%ME
Begin enhanced print.
60
[ESC] H
1BH,48H
&%CE
End enhanced print.
60
[ESC] I <n>
1BH,49H
&%QT {n=0}
&%QU {n=1}
&%QL {n=2}
&%QS {n=3}
Select print quality mode.
n=0 Draft (12 x 12)
n=1 Large draft (12 x 14)
n=2 NLQ (24 x 16)
n=3 NLQ (24 x 16)
n=4-7 Repeats 0-3
44
[ESC] J <n>
1BH,4AH
&%FM <m1> <m2> <m3>
Perform a fine line feed.
36
[ESC] K <n1> <n2>
1BH,4BH
none
Print single-density
graphics.
<n1>=0...255
<n2>=0…3
len=<n1> + 256 * <n2>
68
[ESC] L <n1> <n2>
1BH,4CH
none
Print half-speed doubledensity graphics.
69
[ESC] P <n>
1BH,50H
&%RI
&%RF
&%RN
Rotated font. (See
command description).
45
[ESC] R
1BH,52H
&%HV
Reset horizontal and vertical
tab stops.
35
[ESC] S <0>
1BH,53H, 00H
&%SP
Select superscript.
61
[ESC] S <1>
1BH,53H, 01H
&%SB
Select subscript.
61
Page 108
Rev B
The content of this document is proprietary. It may not be divulged in
whole or part without permission from TransAct Technologies Incorporated.
06/01/00