Download POSJet 1000 Programming Guide

General Specifications
POSjet™ 1000
Programmer’s Guide
Receipt Printing
0.77” (19.56 mm)
2.50” (63.50 mm)
0.25” (6.35 mm)
3.00” (76.20 mm)
Figure 5 Receipt Printable Area
Receipt Printing, Autocutter Position
The paper tear off is positioned 0.77 inches (19.56 mm) from the last line of print. The
autocutter is positioned 1.06 inch (26.92 mm) from the last print line.
Autocutter (Partial Cut Option)
A receipt autocutter is an optional feature with all POSjet™ 1000 Printers.
Cutter type
Guillotine
Media width
3.0 inches (76.20 mm)
Media thickness range
0.003 to 0.004 inch (0.076 to 0.10 mm)
Cut to line of print
1.06 inch (26.92 mm)
Cutter life
1,000,000 cuts
Paper Out
A receipt paper out sensor is provided as a standard feature. It senses when there is
approximately two inches of paper left on the paper roll.
Paper Low
A receipt paper-low sensor is provided as an optional feature. An operator-adjustable
paper-low assembly allows the printer to sense when the paper roll is between 1.50 and
0.75 inches (38.1 and 19.05 mm) in diameter. It is adjustable to compensate for various
paper core dimensions.
Cash Drawer Drivers
Page 12
Rev B
The content of this document is proprietary. It may not be divulged in
whole or part without permission from TransAct Technologies Incorporated.
06/01/00