Download Operator`s Manual
Transcript
adjustable in its vertical position by loosing the locking handle (80/20 Inc. part number 6850) located behind the canvas attachment just above the horizontal screw drive. A canvas or drawing surface should be placed on the ledge of the canvas attachment and the locking clamp on the front of the attachment should be adjusted to securely fasten the drawing surface. Figure O Figure P 10. Tilt Actuator The tilt actuator allows the easel to be automatically tilted towards or away from the user. It is located directly behind the easel frame and attaches to both the frame and the sliding base. The actuator is manufactured by a company called Firgelli Automations. It is rated for 165lbs and can be referenced by model number ZYCJ(s)07-8-12-6”. Figure Q 11