Download Operator`s Manual

Important Safety Instructions
Please be sure to thoroughly read all of the follow safety instructions before using the easel. This
will ensure that the easel functions properly and does not pose a risk of injury to any users!!
1) Ensure that the easel is properly assembled as described in the setup instructions on page 24.
2) Make certain that all electrical connections are securely attached, that all bolts and screws are
tightened, and that all pins are properly inserted. These parts can be found outlined in the
Parts and Accessories section on page 3.
3) Be CERTAIN that the clamp for the tilt actuator is very securely tightened.
4) Keep loose articles of clothing, paper, or any miscellaneous items away from all moving
parts.
5) Ensure that the table clamps are securely tightened to the bottom of the table and that they
are pinned into place.
6) Ensure that canvas attachment is properly installed and that the canvas or drawing surface is
adequately secured.
7) Be certain that the wire connecting the joystick to the easel is not caught on anything that
could cause it to be damaged.
8) Check to make sure that all moving parts have adequate clearance that that there are no
obstructions preventing their movement.
2