Download Operator`s Manual

functions as normal yet the fan continues to sit idle it may need to be replaced. This can be
done by opening the electrical enclosure (see instructions in part II). The four screws on top
of the enclosure holding the fan grill and fan together will need to be removed. This will
then free the fan. It will also need to be disconnected from the power supply. Make sure the
easel is unplugged before attempting any repairs. A replacement fan can be easily purchased
from any electronic or computer supplier. It needs to be rated for 12 volts DC and be 80mm
in size.
Figure 2.2.4
VI. Actuator Connection Plug
This plug provides power to the vertical motion actuator and horizontal motion motor.
There should not need to be disconnected unless the easel is being disassembled. If the plug
is disconnected, be sure that nothing as accidentally gotten into any of the individual sockets
(i.e. lint, dirt, liquids). Under normal use simply check to ensure that none of the wires of the
plug, or the plug itself are damaged. This plug is not replaceable so be sure that it does not
get damaged under normal use or when collapsing the easel frame.
42