Download Operator`s Manual

Figure BB
6. Slide the easel face on the mounts shown in the figure below (Figure BC). These brackets
were made to allow for a manually adjustable vertical range. Set the easel face in the
lowest position possible for the artist (Figure BD). (There is a risk of injury if this step is
not carefully set correctly due to the force of the easel making contact with the artist or
other objects when moving downward electrically.) From the lowest position, the easel
can safely move vertically upwards and never move down further than this set point.
Figure BC
Figure BD
7. Set the canvas on the easel face and adjust the front clamp to snugly attach the canvas to
the easel face.
8. Connect the serial cable to the ports located on the joystick and left side of the easel’s
base. The joystick box can be strapped to a small arm rest or strapped around the artist’s
leg if necessary using the Velcro straps.
27