Download Clock Cable, 4601:5-104
Transcript
Eagle STP and IP7 Secure Gateway Assemblies –48VDC Power Source This section verifies that the –48VDC Power Source has been labeled and connected correctly to the corresponding system frame's Fuse and Alarm Panels (FAPs). Your system may not include all of the frames described. For test points used in the following procedures, see Figure 5-72 and Figure 5-72. DANGER: No commercially AC powered equipment may be used or placed within 7 ft. of –48V equipment. This may create a shock or current loop that can be severely hazardous to personnel and equipment. WARNING: Do not carry exposed metal keys or tools in pockets or on belts when working on or around electronic equipment. Do not wear metal rings, watches, or jewelry on wrists or hands when working on any electronic equipment or other related electrostatic sensitive components. Always wear a wrist strap or other electrostatic protection when handling printed circuit cards and other electrostatic sensitive devices. WARNING: following: Before performing the following procedures do the • Ensure that no power is being provided to the system from the –48VDC power source, such as a power board • Ensure that no circuit cards are installed in the shelves • Remove all fuses from the fuse and alarm panels, see Figure 5-71. • Recheck wiring and connections for proper polarity Figure 5-71. Fuse and Alarm Panels Fuse and Alarm Panel P/N 870-2320-01 Screw Fuse holders Fuse holders PWR TEST POINT POS CRITICAL Screw PWR TEST POINT POS MAJOR PWR ALARM A PWR ALARM B OP/MAINT PWR TEST POINT NEG FAP_DB_A FUSE BANK A MINOR FUSE FAP_JB FAP_AB PWR TEST POINT NEG FAP_DB_B FUSE BANK B TEKELEC e30 fapfront fuses 5-162 910-4601-01 Revision D, May 2005
Related documents
Enterasys APS-3000 Specifications
Garrett Magnum Hubs, 4626:A-16
Tekelec Signaling Products Hardware Manual
1250 Mb
Commands Error Recovery Manual
AnyMedia Access System Releases up to R1.6 and R1.13D ONU
Field Interface Configurator User Manual
Onyx2™ InfiniteReality® Digital Video Port (DVP2) Specification
Intel386™ EX Embedded Microprocessor User`s Manual
RL78 Family FFT Library: Introduction Guide
User Manual
User Manual MicroCal™