Download User`s Guide Network Scanner Operations

Setup
3
Network Board Set
Settings can be specified for the following.
Item
Description
Auto
Selects the transmission speed automatically by auto-negotiation.
100M-Full
Manually specifies a transmission speed of 100 Mbps in full-duplex mode when the transmission speed cannot be selected automatically.
100M-Half
Manually specifies a transmission speed of 100 Mbps in halfduplex mode when the transmission speed cannot be selected
automatically.
10M-Full
Manually specifies a transmission speed of 10 Mbps in full-duplex mode when the transmission speed cannot be selected automatically.
10M-Half
Manually specifies a transmission speed of 10 Mbps in half-duplex mode when the transmission speed cannot be selected automatically.
To specify the network board settings
1
In the Network Setting screen, touch [Basic Settings].
2
Touch [Network Board Set].
3
Touch [Network Board Set], and then
select the transmission speed.
–
4
3-14
"Auto" is the usual setting.
Touch [Enter].
bizhub 362/282/222