1
Download NETGEAR 8800 Chassis Switch CLI Manual
Transcript
NETGEAR 8800 Chassis Switch CLI Manual desirable for the ports to be turned off. Would you like unconfigured ports to be turned off by default? [y/N]: Changing the default failsafe account username and password is highly recommended. If you choose to do so, please remember the username and password as this information cannot be recovered by NETGEAR. Would you like to change the failsafe account username and password now? [y/N]: Would you like to permit failsafe account access via the management port? [y/N]: Since you have chosen less secure management methods, please remember to increase the security of your network by taking the following actions: * change your admin password * change your failsafe account username and password * change your SNMP public and private strings * consider using SNMPv3 to secure network management traffic Example The following command reruns the interactive script to configure management access: configure safe-default-script configure time configure time <month> <day> <year> <hour> <min> <sec> Description Configures the system date and time. Syntax Description month Specifies the month. The range is 1-12. day Specifies the day of the month. The range is 1-31. year Specifies the year in the YYYY format.The range is 2003 to 2036. hour Specifies the hour of the day. The range is 0 (midnight) to 23 (11 pm). min Specifies the minute. The range is 0-59. sec Specifies the second. The range is 0-59. Chapter 2. Commands for Accessing the Switch | 31
