Download Multi-scale edge detection wizard (T44a)
Transcript
INTREPID User Manual Library | Help | Top Multi-scale edge detection wizard (T44a) 44 | Back | Structure of Worm3D surface datasets Parent topic: Specifying input and output files INTREPID performs cluster analysis on each ‘worm’ at the highest continuation level to produce a family of related interface points, foliations and limited fault extents estimated from each cluster. In the output 3D surface dataset, part A is for interface points, part B is for foliations and part C is for fault limited radii. • A - Output interface points have the fields “ContactNumber, X,Y,Depth,Anomaly” shown in the following example. // Intrepid WormE 3D contacts, Projection: TMAMG54, Datum: AGD66 // Intrepid assumes the solutions are below a aero-survey drape surface (zero value), with Z positive upwards Contact,Easting,Northing,Elevation,Anomaly Contact1,747276.187500,8416132.000000,-215.500000,3.284356 Contact1,747582.562500,8415519.000000,-215.500000,4.026762 Contact1,747705.250000,8414906.000000,-215.500000,3.754344 • B - Output foliation points have the fields “ContactNumber, X,Y,Depth,DipDirection,Dip” shown in the following example. // Intrepid WormE 3D contact orientations, Projection: TMAMG54, Datum: AGD66 // Intrepid assumes the solutions are below a aero-survey drape surface (zero value), with Z positive upwards // This file also must be imported by Geomodeller along with the contacts, to define enough constraints to create fault surfaces Contact,Easting,Northing,Elevation,DipDirection,Dip,Polarity Contact1,747693.8,8415176.1,-215.5, 246.0, 36.5, 1 Contact1,747086.2,8416655.0,-422.0, 253.0, 61.2, 1 Contact2,750123.0,8419553.1,-110.0, 229.0, 64.1, 1 • C - Output limited fault radii so that each 3D worm can be treated as having limited extent when rendered within Geomodeller, and allowing the user to merge, delete, and decide on the fault network order // Intrepid WormE 3D contact limited extents box, Projection: TMAMG54, Datum: AGD66 // Intrepid assumes the solutions are below a aero-survey drape surface (zero value), with Z positive upwards // This file also must be imported by Geomodeller along with the contacts, to define enough constraints to create a limited fault surface Contact,HorizontalRadius,VerticalRadius,InfluenceDistance Contact1,5047.2,3310.0,1394.6 Contact2,4177.6,3310.0,1245.1 Contact3,8534.5,3310.0,997.3 Contact4,8801.9,3310.0,3025.5 Geomodeller Project Import and fault network Creation The process of bringing the womrs3D interface/foliation data into Geomodeller and creating a Fault network is described. You need to also have a copy of the Geomodeller tool available and open, ready to use. A very small example project is distributed within the examples/geomodeller_projects/mlevel_example/ Library | Help | Top © 2012 Intrepid Geophysics | Back |