Download flexAnalysis 3.0 User Manual
Transcript
Graphical User Interface (GUI) Bruker Daltonik GmbH 2.4.6.6 Edit Building Blocks The Edit Building Blocks command is used to start the Bruker Daltonics BuildingBlockEditor application which allows you to view and edit the currently available building block sets to be used to automatically interpret m/z differences. Selecting this command starts the BuildingBlockEditor and loads the first of the alphabetically ordered building block sets shown in Building block sets. The building blocks contained in this set are listed in Building Blocks along with their Full name, Abbrev(iation) and chemical Formula. Additionally, the Symbol is shown which appears in the data window when the Annotation mode is active. Various Bruker Default building block sets are available. A <BrukerDefault> appendix to the building block set name indicates these. You cannot alter or delete them. However, you can set up user specific building block sets by copying such a Bruker Default set to a new file name and then modifying the copy according to your own requirements or by creating a completely new building block set Figure 57 2-48 Building blocks contained in the loaded building block set flexAnalysis 3.0 User Manual, Version 3.0