1
Download Setting up and using - Agilent Technologies
Transcript
Chapter 30: WellMate: setting up and using VWorks User Guide Creating a WellMate profile About this topic This topic describes how to create a profile for the WellMate in VWorks. Before you start Before you can create a profile, you need to add the device to the device manager. Procedure To create a WellMate profile: 1. Open WellMate Diagnostics. 2. Click the Profile tab. 3. Click Create a new profile, enter a name for the device in the New Profile dialog box and click OK. 4. Set the Profile Options: a. From the COM port list box, select the port that the WellMate uses to communicate with the controlling computer. b. Enter a value for the Pump speed, using the range shown as a guide. c. Enter a value for the Stage speed , using the range shown as a guide. d. Enter a volume in the Volume to prime on initialization field if you want to prime the lines when the profile initializes. 5. Click Update this profile. 6. If you want to open communications to the WellMate and send the profile settings immediately, click Initialize device using profile. 7. Click OK. 505
