Download Emulex Drivers for Windows

Table 30: iSCSI Error Log Entries on Windows Server 2008 R2 (Continued)
Message ID
Severity
Message
Recommended Resolution
0x12
Error
Unrecoverable error
detected. UE Low: A UE
High: B FW Line: C.
An unrecoverable error was detected by the
iSCSI driver.
This may be caused by hardware errors or
by unhandled exceptions in the hardware or
firmware.
0x13
Error
Hardware initialization
failed, failing driver load
The iSCSI driver detected a failure in the
hardware during initialization.
This failure indicates that the hardware has
not been initialized or is malfunctioning.
This may also indicate that the firmware is
not running correctly.
0x14
Warning
Failed to retrieve scatter
gather list for an SRB, an IO
has failed.
The iSCSI driver failed an I/O request
because it failed to retrieve a scatter/gather
list from the Storport driver.
This failure occurred because of a failed
memory allocation in the operating system.
Check low memory conditions.
0x15
Error
ACIT library table
initialization failed.
An internal API failed in the iSCSI driver
during initialization.
This failure may indicate a low memory
condition.
0x16
Error
An ACIT API failed.
An internal API failed in the iSCSI driver
during initialization.
This failure may indicate a low memory
condition.
0x17
Error
Unsupported hardware,
failing driver load.
Driver loading failed because the PCI
Vendor ID and Device ID are not supported.
Check the UCNA configuration.
0x18
Error
Memory could not be
allocated, failing driver load.
This failure occurred because of a failed
memory allocation in the driver.
This failure may indicate a low memory
condition
0x19
Warning
WMI driver error, code A.
The iSCSI driver failed a WMI IOCTL
request from the port driver. The event log
entry includes the WMI request code in
error.
An operation attempted from the Microsoft
WMI application resulted in an error. Check
the operation being attempted for errors.
Emulex Drivers for Windows User Manual
Page 113