Download MetaFluor User Guide

MetaFluor User’s Guide
Clear Regions
Clears all regions. Closes the Intensity and Ratio graphs if they are open.
Close DIO Driver
Closes the specified DIO (digital I/O) driver.
Close Measurements File
Closes the currently open measurements log file.
Close Save Images File
Closes the .inf file and the associated wavelength image files.
Close Save Ratios File
Clears the selected base name from use in saving a set of ratio images and closes the ratio image files.
Close Serial Driver
Closes the serial driver for the named device.
Configure Background
Configures a background subtraction mode (Image, average gray value in a selected Region, Constant gray
value, or None) for each selected wavelength image.
Configure Image Acquisition
Defines the acquisition settings for each wavelength. This includes the Illumination Device control as well as
the camera acquisition parameters. You must add a new journal entry for each wavelength whose
acquisition parameters you want to define.
Configure Intensifier Gain Control
Specifies the model of ICCD you are using, its serial port, its baud rate, and whether its control is manual or
by computer.
Configure Shading
Configures a shading correction mode (Image or None) for each selected wavelength image.
-D-
Delay
Adds a specified amount of time (in milliseconds) to wait before the next command is carried out.
Display Channel Graph
Shows or hides the analog measurements graph for a selected analog data channel.
Display Message
Displays a message on the message line of the Status window.
Display Windows
Opens a selected command's dialog box.
Draw Image Labels
Enables or disables the display of image labels on an external video monitor.
Draw Quadrant Marks
Enables or disables the display of quadrant marks on an external video monitor.
Draw Region Labels
Enables or disables the use of region labels and specifies their placement.
MetaFluor
19
Version 7.0