Motorola MVME712AM Installation guide Download

Transcript
CONFIGURE AND
ENVIRONMENT COMMANDS
A
Configure Board Information Block
CNFG [;[I][M]]
This command is used to display and configure the board information block.
This block is resident within the Non-Volatile RAM (NVRAM). Refer to the
MVME162 Embedded Controller User’s Manual for the actual location. The
information block contains various elements detailing specific operation
parameters of the hardware. The MVME162 Embedded Controller User’s Manual
describes the elements within the board information block, and lists the size
and logical offset of each element. The CNFG command does not describe the
elements and their use. The board information block contents are
checksummed for validation purposes. This checksum is the last element of
the block.
Although the factory fills all fields except the IndustryPack fields, only these
fields MUST contain correct information:
❏
MPU clock speed
❏
Ethernet address
❏
Local SCSI identifier
Example: to display the current contents of the board information block.
162-Bug>cnfg
Board (PWA) Serial Number = "000000061050"
Board Identifier
= "MVME162-03
"
Artwork (PWA) Identifier = "01-W3814B03A
"
MPU Clock Speed
= "2500"
Ethernet Address
= 08003E20A867
Local SCSI Identifier
= "07"
Parity Memory Mezzanine Artwork (PWA) Identifier
Parity Memory Mezzanine (PWA) Serial Number
Static Memory Mezzanine Artwork (PWA) Identifier
Static Memory Mezzanine (PWA) Serial Number
ECC Memory Mezzanine #1 Artwork (PWA) Identifier
ECC Memory Mezzanine #1 (PWA) Serial Number
ECC Memory Mezzanine #2 Artwork (PWA) Identifier
ECC Memory Mezzanine #2 (PWA) Serial Number
MVME162IG/D2A-1
=
=
=
=
=
=
=
=
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"
"