Download Expert Software User Manual
Transcript
Key Application Pages With an open application the key pages or tabs that should be addressed for a specific application are: 1. System Setup page, for startup options, limits, fault enables, operating modes, Dedicated move and In Position Window. See System Setup section for details. 2. I/O page, for setup of digital I/O assignments. See Digital Input and Output section for detail and descriptions of I/O functions. 3. Home page for set of the Home cycle. See Home Description Section for details. 4. Move page for setup of motion controlled by digital I/O see Move Description Section for Details. 5. Jog page for set of Jog mode, even if the Jog function is not used in the final application it can be handy to test initial motion. See Jog section for details. 6. If Analog Position, Velocity or Torque Modes are used open the appropriate page and see Analog Input section for parameter details. As parameters are changed the text will turn RED, this indicates the parameter has been changed but the drive file with change has not been saved, this indication is also shown when Online operation is active, so if a file is uploaded, any parameters that are different than the open file will show as red. Expert Software Manual PN 47703 REV A 14 12/17/10 Exlar Corporation 952-368-3434