Download User Manual

Transcript
Utilities
Memory test on FPGA block memory. Tests the BlockRAM inside
the FPGA. On the DN2000k10, the BlockRAM is only in FPGA F.
BAR memory range test. Generic memory test that prompts the user
for BAR number, starting address offset, DWORD count, and number of
iterations. The user is also prompted if the program should stop if error
occurs, or if the program should display any errors that occur. This allows
for maximum flexibility when debugging a design with an oscilloscope, or
debugging any memories or memory locations on your PCI bus. The
memory test is very complete, performing a write then a read to every
location, a read from every location, and then a read/write/read test to
every location. All other memory test options listed in the memory menu
are based on this generic memory test function.
9-14
The DINI Group