Download User Manual
Transcript
Utilities Memory test on FPGA block memory. Tests the BlockRAM inside the FPGA. On the DN2000k10, the BlockRAM is only in FPGA F. BAR memory range test. Generic memory test that prompts the user for BAR number, starting address offset, DWORD count, and number of iterations. The user is also prompted if the program should stop if error occurs, or if the program should display any errors that occur. This allows for maximum flexibility when debugging a design with an oscilloscope, or debugging any memories or memory locations on your PCI bus. The memory test is very complete, performing a write then a read to every location, a read from every location, and then a read/write/read test to every location. All other memory test options listed in the memory menu are based on this generic memory test function. 9-14 The DINI Group