Download Chapter 2 EXECUTIVE CONTROL COMMANDS

Transcript
MAXRETAIN
User’s Reference Manual
Case Control Command
MAXRETAIN
Specifies the maximum number of design constraints to be retained during Multidisciplinary Design
Optimization.
Command Syntax:
MAXRETAIN = numg
Option
numg
Meaning
Specifies the maximum number of design constraints to be
retained during the optimization procedure. [1]
Data Range
Integer>0
Remarks:
4
CASE
1.
The default value is 100.
2.
The MAXRETAIN command may only be used when performing Multidisciplinary Design Optimization.
4-92 CASE CONTROL COMMANDS
UAI/NASTRAN