Download Chapter 2 EXECUTIVE CONTROL COMMANDS

Transcript
CBAR
3.
4.
The pin flags are used to remove connections
between the GRID point and selected degrees
of freedom of the BAR. The degrees of freedom are defined in the element coordinate
system and the pin flags are applied at the
offset ends of the BAR. The BAR must have
stiffness associated with the pin flag. For example, if PINA=4, the PBAR entry must have
a nonzero value for J, the torsional stiffness.
If there are no pin flags or offsets, the continuation entry may be omitted.
User’s Reference Manual
Ze
Plane 2
End A
Ye
WA
Plane 1
WB
GID1
GID2
End B
V
GIDO
Xe
7
BULK
7-42 BULK DATA
UAI/NASTRAN