Download Chapter 2 EXECUTIVE CONTROL COMMANDS
Transcript
CBAR 3. 4. The pin flags are used to remove connections between the GRID point and selected degrees of freedom of the BAR. The degrees of freedom are defined in the element coordinate system and the pin flags are applied at the offset ends of the BAR. The BAR must have stiffness associated with the pin flag. For example, if PINA=4, the PBAR entry must have a nonzero value for J, the torsional stiffness. If there are no pin flags or offsets, the continuation entry may be omitted. User’s Reference Manual Ze Plane 2 End A Ye WA Plane 1 WB GID1 GID2 End B V GIDO Xe 7 BULK 7-42 BULK DATA UAI/NASTRAN
Related documents
User Manual
Denon DN-C680 CD Player User Manual
modelação e implementação de processos na plataforma
Manuela Calado - VII Jornadas Técnicas de Segurança no Trabalho
DCAN Macro Version B2 Preliminary User`s Manual
Manuela Calado
User manual of the Work Examiner
National Instruments 370755B-01 User's Manual
Runstream - Shell Buckling
pontifícia universidade católica de minas gerais
CBLIO43-x, CBLIO52-x, CBLIO43DE-x and CBLIO52DE-x
CLBIO4352DEx1 USER`S MANUAL