1
Download R&S UPP User Manual
Transcript
R&S®UPP Manual Operation Units *) Level measurement result in hex notation All digital analyzer measurement functions usually deliver values ranging from 0 to 1 FS. FS values >1 may occur in the following cases: 4.17.1.3 ● In the case of the "Peak" measurement function with "Meas Mode" "Peak to Peak" ● In the case of a filter with gain (e.g. CCIR wtd) is used. Units for distortion measurement results Basic unit: % 4.17.1.4 Unit for S/N measurement results 4.17.1.5 Units for frequency measurement results Basic unit: Hz User Manual 1411.1055.32 ─ 03 172
