Setting Up DNS and LED, etc. (Miscellaneous) You can perform the following settings on the Miscellaneous Page. ● DNS: Enter the name server address and host name to register a DNS host. ● External Device Names: Specify the name of the external device. ● LED Setting: Set the LED of the camera to turn On or Off. After changing setting click “OK” to return to the Settings Title Page. If you do not want to make any changes, click “CANCEL”. ▼ DNS 1 2 1 Name Server Address 1 - 2 Enter the name server address you want to register. If you are using only one name server, leave the Name Server Address 2 field blank. 2 Register Host Name Select and enter the host name you want to register. You can register a host name for the name server address 1. You can use up to 63 characters including A-Z, a-z, 0-9, “-” and “.”. Note 1-18 The host name is useful when using the camera with “Auto Setting (DHCP)” (→ P.1-7). You must register the host name in the DNS server in advance. For more information on DNS server settings, ask the system administrator.