Download Siemens SINUMERIK 802D sl Specifications

Transcript
Overview of alarms
06/2007
Cycle alarms
61193
Channel %1 block %2: compressor option not set up
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The alarm is triggerd by the following cycles: CYCLE832.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the RESET key. Restart part program
61194
Channel %1 block %2: spline interpolation option not set up
Parameters:
%1 = Channel number
%2 = Block number, label
Definitions:
The alarm is triggerd by the following cycles: CYCLE832.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the RESET key. Restart part program
61197
Parameters:
Channel %1 block %2: no swiveling in JOG --> active WO G%4 and basic
frames contain rotations
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycles: CYCLE800.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the RESET key. Restart part program
61198
Parameters:
Channel %1 block %2: no swiveling in JOG --> several active basic
frames(G500) contain rotations
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycles: CYCLE800.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
Remedy:
--
Program Continuation:
Clear alarm with the RESET key. Restart part program
61199
Parameters:
Channel %1 block %2: approach of tool and swivel data record change
(TOOLCARRIER) not allowed
%1 = Channel number
%2 = Block number, label
Definitions:
Alarm triggered by following cycles: CYCLE800.
Reaction:
Interpreter stop
NC Start disable in this channel.
Interface signals are set.
Alarm display.
2-286
" Siemens AG 2007 All Rights Reserved
SINUMERIK 802D sl, Diagnostics Manual, 06/2007 Edition