Download SierraNet M408 User Manual

Transcript
Teledyne LeCroy
Expandability
Note: If the prongs do not slip easily into the holes, use a small nail file or similar device to remove paint from the prongs
Figure 1.10: Insertion of Handle/Tool into Expansion Card Panel
3. Rotate the extraction tool to a horizontal position to lock the prongs into place and make a handle
Figure 1.11: Rotate Handle/Tool from Vertical to Horizontal
4. Using the screwdriver, loosen both retaining screws by rotating them counter‐
clockwise approximately two full turns, until feeling slight resistance. Do not force the retaining screws after two turns.
10
SierraNet M408 User Manual