SierraNet M408 User Manual Download

Transcript
Teledyne LeCroy
Batch Scenario Overview
Select the Jammer checkbox to select all four port pairs or select individual port pairs. If a delay is needed after the command is executed, check the Delay checkbox and set the time in seconds.
Stop Analyzer
Drag and drop the Stop Analyzer command to display the Stop Analyzer Properties dialog.
Figure 5.5:
Stop Analyzer Properties Dialog.
Select the Analyzer checkbox. If a delay is needed after the command is executed, check the Delay checkbox and set the time in seconds.
222 SierraNet M408 Protocol Analyzer User Manual