Download SierraNet M408 User Manual

Transcript
InFusion Scenarios
TeledyneLeCroy
Action
Jammer Internal Triggers
1
4.6.5
Description
Refer to section “Synch Jammer Scenarios with Jammer Internal Triggers” on page 206.
Only shown in Action Properties dialog box when creating a sequence.
Available Resources
You can specify Events, Combined Events and Actions and additional Events. The application automatically checks for the maximum number of terms (Events/Actions). When you exceed the limit, an error is flagged, prompting you to jump to the place that caused the error.
The list of available resources for Ethernet is given below:














Symbol Detector(each has its own Embedded counter) X 4
Auto‐Neg Detector X 4
Counter X 12
Frame Detector X 8
Timer X 8
Frame Jammer X 8
Symbol Substitute X 16
Aut‐Neg Jammer X 4
Capture DWORD slot X 8
Insert/Save frame slot (up to 16K bytes) X 7
Insert BYTEs/Symbols inside frame (up to 128 bytes) X 8
Global Action Register X 8
State per sequencer X 256
Action Register per state X 8
Usage of Action Register: 




Each Counter in Global Rules = 1
Each Counter in State = 1
Each Timer in Global Rules = 2
Each Timer in State = 3
Other Actions = 1
The list of available resources for Fibre Channel is given below:









Symbol Detector (each has its own Embedded counter) X 4
Ordered‐set Detector (each has its own Embedded counter) X 8
Pattern (32bit) Detector (each has its own Embedded counter) X 12
Training Sequence Detector X 4
Counter X 12
Frame Detector X 8
Timer X 8
Frame Jammer X 8
Symbol Substitute X 4
SierraNet M408 Protocol Analyzer User Manual
191