Download TP 277, OP 277 (WinCC flexible) - Service, Support

Transcript
Configuring the Operating System
6.9 Backup and Restore with the Memory Card
8. The restore process is resumed. All data stored on the flash file system is restored. After
successful restore, the following message is displayed: "Restore successfully finished.
Click "OK" and remove your storage card and reboot your device"
Remove the memory card.
Acknowledge this message.
9. The HMI device reboots.
Result
The data from the memory card is now on the HMI device.
See also
Using a Memory Card with the HMI device (Page 5-3)
Displaying Information about the HMI Device (Page 6-27)
6-48
TP 277, OP 277 (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DH01-0AB0