Download TP 277, OP 277 (WinCC flexible) - Service, Support

Transcript
Operating a Project
8.5 Entering Values Using the Keys
Result
You have changed the numerical value or entered a new one.
8.5.6
Entering and Editing Alphanumerical Values
Procedure
You can enter alphanumerical values character-by-character using the system keys.
Proceed as follows:
1. Select the desired input field within the screen with
TAB
.
The existing value is selected in the input field.
2. Enter the value using the system keys.
You have the following options to enter a value:
– The existing value is deleted when you enter the first character. Completely reenter
the value.
– Press
SHIFT
and a cursor key simultaneously. The selection of the field content is
cancelled. Move the cursor in the existing value. You can now edit the characters of
the current value or add characters.
Use the
INS
DEL
key to delete the character to the right of the cursor. Use the
key to
delete the character to the left of the cursor.
To enter characters, switch the numerical keypad to character assignment with the
A-Z
key.
– If the LED of the
HELP
key is lit, info text is available for the selected object or the
current screen.
Use the
3. Select
ENTER
HELP
key to display the info text for the operator control or the current screen.
to confirm your entry.
Result
You have changed the alphanumerical value or entered a new one.
TP 277, OP 277 (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DH01-0AB0
8-17