Download TP 277, OP 277 (WinCC flexible) - Service, Support

Transcript
Operating a Project
8.12 Project Security
6. Select the selection field "Group" with
.
TAB
7. Assign the user to a group.
– Select
ENTER
to open the list box. The list box opens.
– Select the required entry using
or
– Confirm the selection by pressing the
8. Select the input field "Logoff time" with
.
ENTER
TAB
key.
.
9. Enter the desired logoff time using the system keys.
Enter a value between 0 and 60 for the logoff time in minutes. The value 0 stands for "no
automatic logoff."
10.Confirm your entries with "OK".
Procedure - Creating a User in the Enhanced User View
Proceed as follows:
1. Select the user view with the
2. Select a blank line with the
TAB
key via the configured tab order.
or
keys.
3. Select the desired field in the blank line of the user view with the
4. Confirm the selection by pressing the
ENTER
or
keys.
key.
5. Enter the desired user data:
– Enter the data using the system keyboard. To enter characters, switch the numerical
keypad to character assignment with the
A-Z
key.
– Assign the user to one of the groups from the list box. Open the list box with the
ENTER
key and select the desired entry with the
or
keys.
– Enter a value between 0 and 60 for the logoff time in minutes. The value 0 stands for
"no automatic logoff."
6. Select
ENTER
.
to confirm your entry.
Result
The new user is created.
TP 277, OP 277 (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DH01-0AB0
8-41