Download TP 277, OP 277 (WinCC flexible) - Service, Support

Operating a Project
8.11 Operating the [email protected] View
Procedure - Forcing Permissions
If several HMI devices access an HMI device, only one HMI device has permission to
Two cases must be distinguished for this case:
• If another HMI device is already controlling the remote HMI device, if configured
accordingly, you can force operating permission for the remote HMI device.
– You are trying to operate the remote HMI device.
– A dialog appears in which you are prompted to enter the appropriate password for
forcing remote control.
You are now authorized to operate the remote HMI device.
• If another HMI device is accessing your HMI device via the [email protected] view, you can
force local operating permission for your HMI device.
– Press
five times consecutively.
You are given permission to operate your local HMI device.
Procedure – Ending Remote Control
You can end monitoring or control of a remote HMI device with one of the following methods
depending on the configuration:
• Press the key configured for this.
• Exit the screen containing the [email protected] view.
• If configured, display a menu with
. Select the desired menu command with
and the respective identification letter.
Further information on this may be available in your plant documentation.
TP 277, OP 277 (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DH01-0AB0