Download TP 277, OP 277 (WinCC flexible) - Service, Support

Transcript
Commissioning a Project
7.3 Reusing Existing Projects
7.3
7.3
Reusing Existing Projects
The table below shows how you can reuse existing projects, while observing the screen size:
HMI device in the existing project
New HMI device
TP 270 6"
TP 277 6"
OP 270 6"
OP 277 6"
MP 270 6" Touch
TP 277 6" 1)
If you have set options on the MP 270 6" Touch, you must use the MP 277 8" Touch as the
successor.
1)
The following cases are possible:
1. An old project in ProTool is available:
Migrate the project to WinCC flexible and then switch the HMI device.
2. An old project in WinCC flexible is available:
Switch the HMI device in WinCC flexible.
For more information, please see the online help for WinCC flexible or the "WinCC flexible
Migration" user manual.
7.4
7.4
Data Transmission Options
Overview
The table below shows the options for data transfer between TP 277 or OP 277 and the
configuration computer.
Type
Data channel
Backup
Serial
Restore
Updating the operating system
TP 277, OP 277 (WinCC flexible)
Operating Instructions, 09/2007, 6AV6691-1DH01-0AB0
TP 277
OP 277
Yes
Yes
MPI/PROFIBUS DP
Yes
Yes
USB
Yes
Yes
Ethernet
Yes
Yes
Serial
Yes
Yes
MPI/PROFIBUS DP
Yes
Yes
USB
Yes
Yes
Ethernet
Yes
Yes
Serial, with bootstrapping 1)
Yes
Yes
Serial
Yes
Yes
MPI/PROFIBUS DP
Yes
Yes
USB
Yes
Yes
Ethernet
Yes
Yes
1)
1)
1)
7-3