MP 277 - Service, Support Download

Transcript
Configuring the device
6.11 Configuring network operation
6.11.3
Changing the Network Configuration
You can change the network settings for the LAN connection under "Network & Dial-Up
Connections".
Requirement
You have opened the following display using the "Network&Dial-Up Connections" icon.
Procedure
1. Open the "LAN90001" entry.
The following dialog is displayed.
①
②
IP address over DHCP
Manual IP address
2. Select either automatic address assignment over DHCP or manual address input.
3. If you assign the address manually, enter the required address in the text boxes for "IP
Address", "Subnet Mask" and, if used, "Default Gateway".
4. If a name server is used in the network, change to the "Name Servers" tab.
Note the FAQ during setting "Integrating an HMI device into a local network
(http://support.automation.siemens.com/WW/view/en/13336639)".
MP 277
116
Operating Instructions, 07/2014, A5E02479740-02