MP 277 - Service, Support Download

Transcript
Configuring the device
6.6 Changing HMI device settings
6.6.4
Changing monitor settings
Requirement
You have opened the "Display" tab in the "OP Properties" dialog using the "OP" icon.
Procedure
1. If you want to increase the brightness, press the "UP" button.
2. If you want to decrease the brightness, press the "DOWN" button.
3. Confirm your entries.
The dialog box closes.
The screen settings have been changed.
6.6.5
Setting the screen saver
You can set the following time intervals on the HMI device:
● For the automatic activation of the screen saver
● For the automatic reduction in the screen's backlighting
When you do not undertake an operation within the configured interval, the configured
function will be activated automatically.
The screen saver and the reduced screen backlighting functions are switched back off by
means of the following actions:
● By pressing any key
● By touching the touch screen
MP 277
94
Operating Instructions, 07/2014, A5E02479740-02