MP 277 - Service, Support Download

Transcript
Operating a project
8.5 Entering values using the keys
8.5
Entering values using the keys
8.5.1
Control keys
Introduction
The following tables show the control keys with which you operate the project.
Multi-key operation
Unwanted actions may be triggered, if the operator unintentionally actuates a key
combination.
CAUTION
Unintentional actions
In "Online" mode, simultaneous operation of more than two keys may cause unintentional
actions in the plant.
Never press more than two keys simultaneously.
Select operating elements
Key/Keys
–
Function
Description
Tabulator
Selects the next/previous operating element in the tab
sequence.
Cursor keys
Navigates in the operating element.
MP 277
170
Operating Instructions, 07/2014, A5E02479740-02