MP 277 - Service, Support Download

Transcript
Configuring the device
6.5 Changing Password Protection
6.5
Changing Password Protection
You can protect the Control Panel and Windows CE taskbar with a password. Pay particular
attention to the section "Enabling and disabling SecureMode (Page 74)".
Requirement
You have opened the "Password Properties" dialog box with the "Password" icon.
①
②
Password text box
Text box for entering the password a second time
Note
If the password is no longer available, you cannot do the following until you have updated the
operating system.
• Making changes to the Control Panel
• Operating the Windows CE task bar
All data on the HMI device will be overwritten when you update the operating system!
Procedure
Activating password protection
1. Enter a password in the "Password" text box.
Note
The following characters cannot be used in passwords:
• Blank
• Special characters * ? . % / \ ' "
2. Repeat the password entry in the "Confirm Password" text box.
3. Confirm your entries.
The dialog box closes.
You cannot open the Control Panel or Windows CE taskbar without entering a password.
MP 277
Operating Instructions, 07/2014, A5E02479740-02
89