MP 277 - Service, Support Download

Transcript
Configuring the device
6.6 Changing HMI device settings
Note
If you deactivate the settings under "Enable sounds for:" no more acoustic signals will be
emitted during inadvertent operations.
Procedure
1. For HMI devices with keys:
– Click the check box "Hardware buttons" to activate the acoustic signal.
– Choose between a loud and soft acoustic signal using the "Loud" and "Soft" radio
buttons.
2. For HMI devices with touch screen:
– Activate the "Screen Taps" check box to activate the acoustic signal.
– Choose between a loud and soft acoustic signal using the "Loud" and "Soft" radio
buttons.
3. Choose the required volume using the "Loud" and "Soft" radio buttons.
4. Confirm your entries.
The dialog box closes.
Note
The entries in the "Sounds" tab are of no relevance for the HMI device.
The properties of the acoustic operation feedback are now set up.
See also
Overview (Page 157)
MP 277
98
Operating Instructions, 07/2014, A5E02479740-02