MP 277 - Service, Support Download

Transcript
Configuring the device
6.1 Loader
Key operation in the loader
The following table shows the key combinations for navigating in the loader.
Key combination
Function
The next or previous entry is selected.
–
–
The selected button is operated.
Protection against unauthorized use
You can protect the control panel against unauthorized access by using a password.
You can also protect the taskbar and the Desktop with the help of SecureMode. If the HMI
device is protected, "secure mode" is displayed on the Windows CE desktop. You can find
additional information on this in the section "Enabling and disabling SecureMode (Page 74)".
The "Transfer" and "Start" buttons can always be used without having to enter a password.
Password protection prevents maloperation. This increases the security of the system or
equipment because settings for the current project can only be changed after entering the
password.
NOTICE
Loss of data possible
If the password is no longer available, you can only cancel password protection by updating
the operating system. All data on the HMI device will be deleted when you update the
operating system.
Back up the HMI device's data.
MP 277
Operating Instructions, 07/2014, A5E02479740-02
71